Search results

In theory any USB to Ethernet adapter should work in macOS. Although a 10/100mb adapter would be a bit old and so slow to use in any modern macOS release. Apple may have removed support for older USB to Ethernet adapters of that age. Most are now a minimum of 1GB, with some really expensive...

Issues with Intel i225-V Ethernet controllers are common on AMD hacks. Most of the fixes you see on the internet are for Intel Hacks that use the same Ethernet controller, the fixes often don’t work that well, if at all, on AMD hacks. Usual fix is to use AppleIGC.kext and e=1000 boot argument...

Isn’t that the normal way the power button works? Windows and macOS don’t treat power features the same, as they have different drivers and frameworks. So I have to ask why do you expect them to behave in the same way? If I press the power button while running macOS on one of my Hacks (Intel...

Check how you have the power options set in your system Bios. If you have changed anything power related from their defaults, reset them. Do you have the power options set set to power off the system immediately or after a 4-second delay? Are you using any third-party kexts or patches to ‘fix’...

I have attached a revised EFI for you to try. This EFI is based on the settings I used with my Asus STRIX B650-F Gaming system that runs Sequoia and Tahoe. I have reservations about the SSDT's in your ACPI folder, as I don't know where they have been created or who 'ZPSS' is. I have removed...

Good morning, I'm trying to create an efi to install on a Ryzen 9 7950X 16 Core, 16GB Memory, Asus B650-PLUS Motherboard, 1TB nvme hard drive and amd RX 580 8Gb 2048 graphics. The system I'm trying to install is the Tahoe, but it stays halfway and doesn't go past there. Some advice. THANK YOU...

Neither of the graphics cards in your laptop are supported in macOS. You would be better served by running macOS as a VM. See this guide for instructions...

You won’t be able to run macOS on your laptop. Not without a patched Kernel. Then you would probably be restricted to some older versions such as Snow Leopard, Lion or Mountain Lion. That is assuming you can get the GMA graphics to work. A long time ago I ran Snow Leopard on a HP server that...

Check which display settings are enabled for the (extended) display when connected to the Mac and then with the display is connected to your AMD Hack. Are they using the same settings in System Settings > Displays tab, specifically are they using the same ‘Colour profile’? If not then try...

Yes, the Intel AX210NGW M.2 card is compatible with macOS, as long as you use the right kexts and application. There are some limitations when using an Intel WiFi/BT card, but aren't there always. For the WiFi module you need to add Itlwm.kext to your /EFI/OC/Kexts folder with a corresponding...

Is this the MSI motherboard you are using? https://www.msi.com/Motherboard/MAG-X870E-TOMAHAWK-WIFI That motherboard has a USB Audio so you shouldn't need any kexts to get it working. The kexts that Apple provide should work with the USB device. That assumes you have created a working...

While that WD drive looks like it should be OK for use as a macOS drive, I would be a little wary as it doesn’t use the same Controller as the other main stream WD drives. They all use ‘Polaris’ controllers, whereas the SN730 uses a ‘20-82-00705-A2 Triton MP28’ controller. The SN730 is...

Uses the Silicon Motion SM2263XT Controller, so while it doesn't use a Phison controller it will not be much better than your current drive. I have a KingSpec NVMe drive in my ASRock X300 system and ended up using it for Windows 11, as it wasn't great as a macOS boot drive. At least it...

Here is a copy of the original UTBMap.kext I created in Windows. These screenshots show the four USB Controllers and the ports active under each. I have also attache two screenshots (Windows SNIPS) showing the naming of the ports as discovered on my system in the Fractal Design R5...

Here are a few screenshots from the bios v3265, which I downgraded to from v3602.

Another recent build I have been playing with over the last month. This time an Asus AM5 build using the following components: Case: Fractal Design R5 (White) MB: Asus ROG STRIX B650E-F Gaming WiFi Intel Ethernet i226-V Realtek USB audio 3 x M.2 NVMe connectors 1 x M.2 WiFi/BT connector...

FYI. The PC601 SKhynix NVMe 256GB (Win 11) drive started causing issues, so I have removed it, plus Windows 11 for now. I will either install Windows 11 on another compatible NVMe drive or a spare SSD, if I feel the need for Windows on this system.

Have you at any point used a Full (17GB+) off-line installer, which you created using the CreateInstallMedia Terminal command?

Sorry to hear that. I am not sure what else to suggest.

I know you have downloaded the installer a few times, but I would still look at the macOS app as being the culprit for your problems. I assume you are using the CreateInstallMedia terminal command to create the installer on a HFS+ formatted USB pen drive, which is 32GB or larger, so it can...