Recent content by MoneyT20

Gonna have to figure something way to put it all back in but with bifrication on 8x8 and the 1st slot to gen 3, 2nd slot to gen 4, and 3rd slot set to gen1 speed. It works

Got it to work with both cards after I removed the board to put the 4070 in the 2nd slot and the RX480 in the top slot (it didnt fit before). The speed in windows has dropped but it does boot both systems now. Just need to figure this out but wouldve been preferable with the normal setup to have...

So update after making changes to the bios setting it to x4x4x4x4 bfrucation and changing the prom21 chipset disabling some ports it attempts to boot with my old efi. Putting the card back in the top slot or removing it completely it boots still but this is the closest to booting in the 2nd slot.

Here it is with bios reset and 4070 removed and rx480 back in pcie 5 slot with all settings disabled as normal (secure boot, csm, etc)

Ok the provided efi won't boot even woth removing the 4070 and putting the RX480 in the pcie 5 slot again it refuses to boot. Here is the verbose data with the 4070 with the 480 in the 2nd slot

Just getting off work will definitely try this. And yes I used efi for the x670 GENE forum....as a base

Hello everyone just saying hi since i saw the join email late. Hope i can be of assistance and ask for help from everyone. Thanks for having me

Here are the drive locations

I played around with that also it has the settings for auto, 8x8 , 8x4x4x, and 4x4x4x4x. I will test these out again and report back to see if there is any difference. hopefully its a quick fix that i need. I am unable to test the bottom slot because of no extension cable and space constraints...

I can disable the SATA ports and a few of the m.2 connectors in the bios and try. its just odd that the RX480 will boot in the 2nd slot with the system and to windows fine. but not with Ventura it makes it half way through boot and crashes. In the first slot its fine. I would swap and put the...

None that i can see only settings are for changing the Gen speed of each slot. I saw someone had a similar issue but said theirs was because of needing the 2nd slot enabled as the 1st was damaged to asus. Asus sent them a modded bios to enable 2nd slot primary. Mine just has intergraded...

I have a Gigabyte X670 Aorus Elite AX with a 4070ti in the primary slot and a rx480 in the 2nd pcie slot for booting Ventura. It only boots if the RX480 is in the 1st slot. If its in the 2nd slot even with the 4070ti removed it will not boot. I have attached my EFI and my disabled gpu file up...